-New LED wall washer Adopting TPU material, it’ s resistant to yellowing, high temperature, corrosion, weak acid and alkali, andhas great flexibility. -PU glue is used for filling and sealing, so that it has strong adhesion, good durability and high reliability. It can replace the traditional hard wall washer light or LED strip. It’ s small in size, light in weight, flexibleand easy to install. -Various beam angles (30°, 45°, 60°, 20*45°) are available for different applications. With low voltage DC24V, higher safety factor
Product Introduction
-Adopting TPU material, it’ s resistant to yellowing, high temperature, corrosion, weak acid and alkali, andhas great flexibility.
-PU glue is used for filling and sealing, so that it has strong adhesion, good durability and high reliability.
It can replace the traditional hard wall washer light or LED strip. It’ s small in size, light in weight, flexibleand easy to install.
-Various beam angles (30°, 45°, 60°, 20*45°) are available for different applications.
With low voltage DC24V, higher safety factor
| IP classification: | IP65 option |
| Power source: | 24V AC |
| Electrical connection: | 2x cable with 2-PIN to open wires |
| Maximum quantity per power input: | 1m |
| Average lifetime*: | 50.000 h at L80/B10 |
| Operating temperature range: | -10° C till +45° C |
| Width x height: | W18.5mm*H9.5mm |
| Cuttable: |
Technical Dimension:
| Model No. | CCT | CRI | LED Power | Beam angle | LED Output | Input Voltage |
| WS48-2835W-24-IP67 | 2700K | CRI Ra>80 | 18w | 30°/45°/60°/20*45° | 1819LM | 24V DC |
| WS48-2835W-24-IP67 | 3000K | CRI Ra>80 | 18w | 30°/45°/60°/20*45° | 1910LM | 24V DC |
| WS48-2835W-24-IP67 | 4000K | CRI Ra>80 | 18w | 30°/45°/60°/20*45° | 2190lm | 24V DC |
| WS48-2835W-24-IP67 | 6000k | CRI Ra>80 | 18w | 30°/45°/60°/20*45° | 1976lm | 24V DC |
